Wednesday, August 13, 2014

Tarsia Geometrica Part II


Italian Commode



To continue the explanation of Tarsia Geometrica and its various forms from the previous post, I would like to return to the term "frisage."  Obviously this term is French and not much used in American woodworking shops.  However, it is really well known under different terms in our language.

To put it simply, the worker in veneer often takes a flitch of veneer and matches it in some way to make a decorative pattern.  In English these are called "book match" or "slip match" for example.

Roubo, writing in his 18th century treatise, illustrated various frisage patterns as follows:



Roubo Illustration Volume IV


Take this Italian commode, which I recently had the pleasure to restore.  The facade of the drawers have a frisage made of French walnut, and the border is a frisage of lignum vitae.  The border is a good example of using the sap wood and heart wood of a dark species to create a vibrant effect.

Look at the end of the commode:

Italian Commode with Decorative Frisage

This frisage is made by using a pattern to cut the veneer as follows:

Two Common Frisage patterns

The pattern used on the commode is the "diamond" or "square" which is illustrated by the right example. Simply changing the direction of the grain and using the same method creates the "reverse diamond" or "cross" as shown on the left example. You will note the chalk on the left pattern.  I use this to show what can be done by placing the left pattern over the right pattern and cutting through both at the same time with a homemade blade of a certain thickness, like 2mm or 3mm or larger.  This will produce two results:  a diamond center with a reverse diamond border, and a reverse diamond center with a diamond border.  The gap left by the saw blade is then filled with an inlay strip of the appropriate width.

Using another pattern produces the butterfly pattern:

Butterfly Frisage

One of the most fantastic (and rare) examples of frisage is found on a few pieces from the 18th century and starts with sawing the log of wood at an angle.  Logs can be cut perpendicular across the end which produces "oyster" veneers.  However, by sawing at an oblique angle you produce "sausage" veneers.  If you have seen any of my tall case clocks, you will note I use both of these frequently.

Here is a large piece of sausage cut tulip wood veneer which is then assembled to create a wonderful frisage pattern:

Sausage cut Tulip veneer

So, frisage relies on using the same species of wood to create a pattern.  As I pointed out in the previous post, using different species and more complicated patterns creates a different term: jeux de fond.  I mentioned using a simple jig to cut the elements. Here is that set up:

Simple Jig for cutting Cube elements with Material and Saw in place

The saw is controlled to cut exactly 60 degrees.  The stop is set so the the material is exactly the same length on all sides.  The saw has no kerf so the cuts are fine and accurate.  The material packet is composed of three different species, in a long strip, glued on the end and planed to fit exactly between the two wood strips on the jig.  You push the strip (shown in the photo sideways for illustration) in the groove between the wood strips up to the stop.  Then you saw the packet and remove the pieces.  Repeat by sliding the strip again up to the stop and saw.  With this method you can easily and accurately cut hundreds of pieces for the cube.

As I mentioned also in the previous post, you can change the wood species and get dramatic results:

Different Examples of Cube Jeux de Fond

On the left is a cube made of the single species of ash, which creates a modern effect.  Next is a cube made of oak, with a similar result.  Then there is the classic cube with three different species.  On the right is a cube made of tulip which has a gradual change in the wood from heart wood to sap wood, and that effect is quite different.  Obviously there are unlimited choices, using the same jig.

Roubo illustrated the different patterns of jeux de fond as follows:

Roubo Jeux de Fond Volume IV


Creating a different jig produces the "chevron" jeux de fond pattern:

"Chevron" pattern

I should mention that these examples are some of the samples I made over 20 years ago and have managed to drag around from talk to talk.  They have suffered, and at one point, actually got rained on, so they are in rough shape.  I think it's time I made some new samples...

Next post will discuss the "tarsia a toppo" method.

PS:  I was just "reminded" by one of my former students and a rather talented woodworker/craftsman, Aaron Radelow, that he had posted some of this material years ago. Out of respect I provide here a link to his blog post:Radelow does Jeux de fond

6 comments:

Peter Duig said...

Wonderful post! Thank you very much indeed for sharing your knowlege with us. Did you ever create the pattern shown in 'Fig. 3' in Roubo's plate 286 that you have addressed in this blog post?

W. Patrick Edwards said...

I have not made that particular example, but I have restored French table tops which were similar.

Why do you ask?

Peter Duig said...

Thanks for taking you time to respond. I am just curious (and very fond) about this particular design. I see it here and there on contemporary pieces but the modern makers seem to simplify the pattern a bit. Either way I never understood the simplified construction method nor the one shown in Ruobo's plate 286. The 'Cube Jeux de Fond' always carry for me a 'look at me, what I can do, kind of visual trickery' whereas the "diagonal pattern" is conveying its visual message in a more refined way. For me anyways. I think this desgin would provide a good basis for a fww masterclass...! Would you happen to know the proper name of the design?

W. Patrick Edwards said...

Reference page 289 in Ramond's book, "Marquetry."

The translation provided in the Lost Art Press edition of Roubo is on page 75.

There is no specific name for this design. What you see in Figure 3, plate 286 can be discribed as either a square or a lozenge in a grid or frame.

Peter Duig said...

Both points of reference you provide are much appreciated. Thank you. Cutting a brass 'template' for the pattern is an exiting challenge!

Anonymous said...

I just read this post and the previous one on "Tarsia Geometrica" and really enjoyed them. The combination of practical technique and historical reference is great. Many thanks for sharing this.

I'm just experimenting with inlay, and obviously there is overlap between various types of Marquetry that I see on your blog and what I'm experimenting with (I'm working towards reproducing the "bolection inlay" technique as used by Greene & Greene on their furniture. Reading through your blog I'm becoming more interested in the broader range of Marquetry and am thinking about attending your classes in the future.

Great stuff!